[1]王爱国,陆贲琪,李沿鑫,等.桡骨远端骨折夹板外固定有限元模型的建立及其愈合过程的应力分析[J].中国中医骨伤科杂志,2024,32(03):7-11.[doi:10.20085/j.cnki.issn1005-0205.240302]
　WANG Aiguo,LU Benqi,LI Yanxin,et al.Establishment of Finite Element Model of External Fixation of Distal Radius Fracture Splint and Stress Analysis of Fracture Healing Process[J].Chinese Journal of Traditional Medical Traumatology & Orthopedics,2024,32(03):7-11.[doi:10.20085/j.cnki.issn1005-0205.240302]
点击复制

桡骨远端骨折夹板外固定有限元模型的建立及其愈合过程的应力分析()
分享到：

《中国中医骨伤科杂志》[ISSN:1005-0205/CN:42-1340/R]

卷:
第32卷
期数:
2024年03期
页码:
7-11
栏目:
实验研究
出版日期:
2024-03-15

文章信息/Info

Title:
Establishment of Finite Element Model of External Fixation of Distal Radius Fracture Splint and Stress Analysis of Fracture Healing Process
文章编号:
1005-0205(2024)03-0007-05
作者:
王爱国1; 陆贲琪2; 李沿鑫2; 金鸿宾3; 陆军1; 赵允1△
1天津市中医药研究院附属医院(天津,300120)
2天津中医药大学研究生院
3天津市天津医院
Author(s):
WANG Aiguo1; LU Benqi2; LI Yanxin2; JIN Hongbin3; LU Jun1; ZHAO Yun1△
1Affiliated Hospital of Tianjin Academy of Traditional Chinese Medicine,Tianjin 300120,China; 2Graduate School of Tianjin University of Traditional Chinese Medicine,Tianjin 301617,China; 3Tianjin Hospital,Tianjin 300211,China.
关键词:
夹板外固定;  桡骨远端骨折;  三维有限元模型;  应力分析
Keywords:
splint external fixation;  fracture of distal radius;  three-dimensional finite element model;  stress analysis
分类号:
R683.41
DOI:
10.20085/j.cnki.issn1005-0205.240302
文献标志码:
A
摘要:
目的:分析桡骨远端骨折柳木夹板外固定及其骨折愈合的生物力学特性,为临床治疗提供依据。方法:将CT影像文件转化为三维有限元模型,采用三维重建软件Mimics10.01重建了尺骨、桡骨、肌肉和夹板的实体模型,并对模型进行网格划分,经光滑处理后以STL格式输出尺骨、桡骨、肌肉和夹板的实体模型。将导出的实体模型再导入点云处理软件Geomagicstudio10中,经过去噪、光滑构造曲面片、构造格栅和生成曲面处理后,形成较为光滑的实体模型,得到的尺骨、桡骨、肌肉和夹板的实体模型以STP格式输出,导入有限元软件ANSYS12.0生成有限元实体模型。将得到的尺骨、桡骨、肌肉和夹板实体模型导入ANSYS12.0后,对肌肉和尺骨、桡骨进行布尔运算,先从肌肉模型中减去尺骨和桡骨,将得到的肌肉模型和尺骨、桡骨模型粘接,再导入夹板模型,生成包括尺骨、桡骨、肌肉和夹板的实体模型。建立桡骨远端AO分型A3骨折,模拟骨折愈合不同阶段进行应力分析。结果:实体模型分为四个接触单元,分别是桡侧夹板与前臂、尺侧夹板与前臂、背侧夹板与前臂及掌侧夹板与前臂,完成夹板绑缚前臂模型的建模。以愈合0%(骨折初始)、愈合20%和愈合50%为例,应力最大区域位于掌侧、桡侧夹板近端和腕部,最大应力分别为8.44 MPa和0.92 MPa。结论:桡骨远端骨折柳木夹板外固定的生物力学特点为压力容易集中在软组织丰厚的掌侧、桡侧夹板近端及骨突处。
Abstract:
Objective:To study the biomechanical properties of willow splint external fixation and fracture healing for distal radius fractures,and to provide theoretical basis for clinical treatment.Methods:The CT image file was transformed into a three-dimensional finite element model that can be used for calculation.The solid model of ulna,radius,muscle,and splint was reconstructed by using the three-dimensional reconstruction software Mimics10.01,and the model was meshed.The model was performed for smooth processing before was inputted into the finite element analysis software,and then output the solid model of ulna,radius,muscle and splint in STL format.Then the derived solid model was imported into the point cloud processing software Geomagicstudio10.After denoising,smooth surface patches,grid and curved surface processing,a relatively smooth solid model was formed.The obtained solid models of ulna,radius,muscle,and splint were output in STP format and imported into the finite element software ANSYS12.0 to generate a computable finite element solid model.After introducing the solid model of ulna,radius,muscle,and splint into ANSYS12.0,the boolean operation of muscle,ulna and radius was carried out; the ulna and radius were subtracted from the muscle model; the muscle model was bonded with the model of ulna and radius,and then imported into the splint model to generate the solid model including ulna,radius,muscle and splint.AO type A3 fracture of distal radius was established,and stress analysis was performed at different stages of fracture healing.Results:The solid model was divided into four contact units,namely radial splint and forearm,ulnar splint and forearm,dorsal splint and forearm,and volar splint and forearm,to complete the modeling of the splint-bound forearm model.Taking 0% healing(initial fracture),20% healing,and 50% healing as example,the areas with the greatest stress were located at the palm side,and the proximal end of the radial splint,and the wrist,and the maximum stress was 8.44 MPa and 0.92 MPa,respectively.Conclusion:The biomechanical characteristics of willow splint external fixation of distal radius fracture are that the pressure is easy to concentrate on the palmar side of rich soft tissue,the proximal end of radial splint and bony process.

参考文献/References:

[1] HANEL D P,JONES M D,TREMBLE T E.Wrist fractures[J].Orthop Clin North Am,2002,33(1):35-57.
[2] 王爱国,王志彬,金鸿宾,等.夹板固定带的研究进展[J].中国骨伤,2008,21(12):946-948.
[3] 丁泽钦.桡骨远端骨折患者实施中医正骨手法与中医方剂联用治疗对腕关节功能恢复效果的影响[J].中医临床研究,2022,14(9):118-121.
[4] 姜昆,陶宝琛,魏成建.小夹板治疗桡骨远端关节内骨折的有限元分析[J].医用生物力学,2018,33(3):206-211.
[5] 陶宝琛,姜昆,郑斌,等.智能气囊小夹板治疗桡骨远端伸直型关节内骨折的三维有限元分析研究[J].中华中医药杂志,2017,42(4):1856-1859.
[6] 王恩国.外固定支架与小夹板治疗桡骨远端骨折临床效果比照观察[J].临床医药文献电子杂志,2020,7(39):60.
[7] 张容超,徐卫国,万春友,等.手法整复小夹板固定治疗桡骨远端骨折168例[J].中医正骨,2015,27(11):61-64.
[8] 周三保,林望得,王新杰,等.手法复位小夹板固定治疗桡骨远端骨折临床观察[J].广州中医药大学学报,2010,27(3):228-230.
[9] 李木清,吴官保.手法复位、夹板外固定治疗尺桡骨干双骨折63例临床观察[J].医学临床研究,2006,23(6):958-959.
[10] 林威力.自制中药膏外敷联合手法复位小夹板外固定对桡骨远端骨折患者骨折愈合及腕关节功能的影响[J].中医临床研究,2022,14(8):67-70.
[11] 熊恒恒,聂伟志.三维有限元分析对骨关节和相关软组织损伤时应力状态的精准模拟[J].中国组织工程研究,2022,26(36):5875-5880.
[12] 龙旭东,方家栋,杨黎,等.数字化技术在骨科手术中的应用进展[J].海南医学,2022,33(13):1737-1740.
[13] 宫赫,张萌,邹姗姗.肌骨系统生物力学建模2021年研究进展[J].医用生物力学,2022,37(1):18-26.

备注/Memo

备注/Memo:
基金项目:国家自然科学基金青年项目(11802207)
天津市卫健委中西医结合科研课题(2023038)
天津市中医药研究院附属医院院内项目(2022014)
天津市中医重点专科建设项目
△通信作者 E-mail:13920190627@139.com
更新日期/Last Update: 2024-03-15