[1]胡维界△,豆娟,王振运,等.新型解剖锁定钢板治疗肱骨远端骨折的有限元分析[J].中国中医骨伤科杂志,2023,31(09):45-49.[doi:10.20085/j.cnki.issn1005-0205.230908 ]
　HU Weijie,DOU Juan,WANG Zhenyun,et al.Finite Element Analysis on the Novel Anatomical Locking Plate for Distal Humerus Fractures[J].Chinese Journal of Traditional Medical Traumatology & Orthopedics,2023,31(09):45-49.[doi:10.20085/j.cnki.issn1005-0205.230908 ]
点击复制

新型解剖锁定钢板治疗肱骨远端骨折的有限元分析()
分享到：

《中国中医骨伤科杂志》[ISSN:1005-0205/CN:42-1340/R]

卷:
第31卷
期数:
2023年09期
页码:
45-49
栏目:
临床论著
出版日期:
2023-09-15

文章信息/Info

Title:
Finite Element Analysis on the Novel Anatomical Locking Plate for Distal Humerus Fractures
文章编号:
1005-0205(2023)09-0045-05
作者:
胡维界1△; 豆娟2; 王振运2; 李毛毛1; 周峰1; 刘峰1
1庆阳市第二人民医院骨科(甘肃 庆阳,745000) 2庆阳市人民医院骨科
Author(s):
HU Weijie1△; DOU Juan2; WANG Zhenyun2; LI Maomao1; ZHOU Feng1; LIU Feng1
1Department of Orthopedic,Qingyang Second People's Hospital,Qingyang 745000,Gansu China; 2Department of Orthopedic,Qingyang People's Hospital,Qingyang 745000,Gansu China.
关键词:
肱骨远端骨折;  骨折固定;  钢板固定;  有限元分析
Keywords:
distal humerus fracture;  fracture fixation;  steel plate fixation;  finite element analysis
分类号:
R683.41
DOI:
10.20085/j.cnki.issn1005-0205.230908
文献标志码:
A
摘要:
目的:通过有限元模型分析新型解剖锁定钢板固定肱骨远端骨折模型的稳定性,验证该新型解剖锁定钢板的固定效果,为钢板生产及临床应用提供理论依据。方法:将右肘关节CT断层扫描数据以dicom格式导入mimics19.0中,可以得到三个不同的视图(即原始的轴向视图和由切层数据得到的冠状面和矢状面)。将mimics导出的STL文件导入ANSA14.0中,将网格模型导出inp格式文件,导入Abaqus2016中进行计算,生成新型解剖锁定钢板网格模型。网格模型限制肱骨近端自由度,肱骨远端施加垂直向下50 N集中载荷,观察其应力及位移情况。结果:肱骨远端施加垂直向下载荷(50 N)条件下,新型解剖锁定钢板及螺钉最大应力为12.53 MPa,最大位移为6.62 μm。结论:有限元分析结果表明,新型解剖锁定钢板固定肱骨远端骨折稳定性良好,可满足临床使用要求,达到固定条件。
Abstract:
Objective:To verify the fixation efficacy of the new anatomical locking steel plate,and to provide theoretical basis for steel plate production and clinical application,by finite element analysis of the stability of a new anatomical locking plate for fixation of distal humeral fractures in a model.Methods:CT scan dicom format data of the right elbow joint were imported into mimics19.0,and three different views were obtained,the original axial view and the coronal plane and sagittal plane obtained from the sectional data.The mimics exported STL file import into ANSA14.0,export the grid model into inp format,import it into Abaqus2016 for calculation,and generate the novel anatomical locking plate grid model.The grid model limited the degree of freedom of the proximal humerus,and the distal humerus was subjected to concentrated loads of 50 N vertically downward and observe its stress and displacement.Results:Under the vertical downward load(50 N)applied to the distal humerus,the maximum stress of the new anatomic locking plate and screw is 12.53 MPa and the maximum displacement is 6.62 μm.Conclusion:The results of finite element analysis show that the new anatomic locking plate has good stability and can meet the requirements of clinical and the fixed conditions.

参考文献/References:

[1] ATIF M,HASAN O,MOHIB Y,et al.Does surgical approach affect outcome after fixation of intra-articular fractures of distal humerus? Retrospective cohort study from a level-1 trauma centre in a metropolitan city[J].Ann Med Surg(Lond),2019,43:48-51.
[2] JANSEN H,EDEN L,MEFFERT R H,et al.Posttraumatic elbow agility and reduction of muscle force after intra-articular distal fractures of the humerus in adults[J].Technol Health Care,2019,27(4):431-439.
[3] HAN S H,PARK J S,BAEK J H,et al.Complications associated with open reduction and internal fixation for adult distal humerus fractures:a multicenter retrospective study[J].J Orthop Surg Res,2022,17(1):399.
[4] VIRANI S R,SONONE S,DAHAPUTE A A,et al.Functional results of communited intra-articular distal humerus fractures treated with bicolumnar plating[J].J Clin Diagn Res,2017,11(4):RC01-RC03.
[5] SHIH C A,SU W R,LIN W C,et al.Parallel versus orthogonal plate osteosynthesis of adult distal humerus fractures:a meta-analysis of biomechanical studies[J].Int Orthop,2019,43(2):449-460.
[6] BHAYANA H,PANDEY R,DHAMMI I K,et al.Comparative study for assessment of functional outcome of intraarticular ao type C distal humerus fractures treated by parallel plating[J].Indian J Orthop,2019,53(1):190-195.
[7] ATHANASELIS E D,KOMNOS G,DELIGEORGIS D,et al.Double plating in type C distal humerus fractures:current treatment options and factors that affect the outcome[J].Strategies Trauma Limb Reconstr,2022,17(1):7-13.
[8] KUMBARACI M,BASA C D,TURGUT A.Analysis of factors affecting return to work after surgical treatment in patients with ao type C distal humerus fractures[J].Indian J Orthop,2020,55(3):680-687.
[9] PATEL S S,MIR H R,HOROWITZ E,et al.ORIF of distal humerus fractures with modern pre-contoured implants is still associated with a high rate of complications[J].Indian J Orthop.2020; 54(5):570-579.
[10] CHANG N,KING G J W.Elbow hemiarthroplasty for the treatment of distal humerus fractures[J].Orthop Clin North Am,2020,51(2):265-277.
[11] JAMOH K,TONK G.How to choose between the transolecranon and triceps-reflflecting approaches to treat distal humerus fractures in adults:a prospective study[J].Rev Bras Ortop,2022,57(2):301-307.
[12] KU K H,BAEK J H,KIM M S.Risk factors for non-union after open reduction and internal fixation in patients with distal humerus fractures[J].J Clin Med,2022,11(10):2679.
[13] HAGLIN J M,KUGELMAN D N,LOTT A,et al.Intra-articular distal humerus fractures:parallel versus orthogonal plating[J].HSS J,2022,18(2):256-263.
[14] KHARBANDA Y,TANWAR Y S,SRIVASTAVA V,et al.Retrospective analysis of extra-articular distal humerus shaft fractures treated with the use of pre-contoured lateral column metaphyseal LCP by triceps-sparing posterolateral approach[J].Strategies Trauma Limb Reconstr,2017,12(1):1-9.

备注/Memo

备注/Memo:
基金项目:甘肃省陇原青年创新创业人才项目(2020RCXM168)
△通信作者 E-mail:huweijie175@163.com
更新日期/Last Update: 2023-09-01